[nick1423]

在討論區發現.........好好玩
1. With the FZ10 in stand-by mode or power off, set the dail to 'P' mode. then switch On the power while at the same time holding down the '^'(up) and 'Brust Mode' buttons.

2. Switch the FZ10 to Playback mode, and press '^'(up) & the 'Burst Mode' button at the same time.(You'll hear a beep)

3. Switch back to 'P' Mode. Then turn of the power while pressing the 'Menu' and '>'(right) buttong at the same time.

4. When the setting screen appears, use the 'v'(down) button to select 'USA'. Press '>'(right) to set.

The TV/LCD will now display whatever is shown in the FZ10 viewfinder or LCD screen.

Hope this will give FZ10 some extra point to be consider. ^_^


set 完之後須要重設時間,自己既setting 都會無左
以後可以用12x 在TV 上監視對面既朋友

[v234567]

hi,

你o係邊樹討論區發現? 重有無其他 trick?

[nick1423]

估唔到得你一個回應.....
咁正既發現

www.dpreiev.com
forum搵到ga

[Manuel Li]

sorry ar,not relly understant what is it
is it said that ,we can use "zoom",when we use viedo ?

[nick1423]

平時咪唔可以起影相模式 "P ,A,S,M"接駁電視既 ( 只有睇相模式 "綠色箭咀"至可以 )

Set 完以上 設定 就可以做到 LCD -TV 同步影相

[winson531]

但係其化樹根本就得ga bor

[benjaminlnm]

not understand clearly!

1. Which one is 'Brust Mode' button ?
2. Between point 3 to point 4, does is means we needs to power on again after point 3, then "When the setting screen appears" will happen in point 4?

Thanks for advice!

[hkmediocrity]

那拍video都得嗎?????

[hkmediocrity]

那拍video都得嗎?????

[v234567]

有無辦法影到TIFF?