[dcmad]

各位師兄:

有冇人可以教我點樣可以令到拍攝時同時可以控制兩支唔同?閃光燈同時閃,我有一支SB800同一支SB28,我想用SB800?機身上面,而SB28裝?腳架度補後面光,咁樣可唔可能呀?

[Philippe]

你可以買一隻Tumax出的閃光感應執靴裝上腳架上.

[dcmad]

Philippe:

係咪裝?之後支副燈就會自動跟住支主燈閃?啦?

[Jenith]

dcmad,
be careful, if your camera flasher have the pre-flash(預閃), the 閃光感應器 will detect the pre-flash and that make the external flasher start... the real flash will not be detected because the external flasher is still charging.

[dcmad]

Jenith兄:

我用D70?, 應該唔會預閃,除非?防紅眼, 原來?樣配件係要探測到閃光先會閃?,咁如果我將支副燈放?人後面,會唔會唔識閃??

[Jenith]

dcmad,
We had been discussed this topoc under forum of Canon 交流區 on end of May 2004, have a look,

http://tos.oknet.net.tw/modules/newbb/viewtopic.php?topic_id=4519&forum=23#39433

Also have a look on this web-site, talking about the skipping pre-flash by TUMAX DS20S2

[tleung11]

dcmad:
D70 如果你開 i-ttl 係有預閃架, 所以你要咁做既話, 第一係要放個 sensor o係個主閃可以閃得到既地方先得.
第二就要用 m mode 黎閃 (auto 應該都得)

[Philippe]

正如tleung11兄所講,D70的i-ttl係有預閃的.不過快到睇唔到.但不用擔心,Tumax的閃光感應閃燈可以設定第二次閃燈先閃,最多仲可以去到第五次先閃.
但係要留意這類產品有最高操作亮度限制,如果喺大太陽下可能感應唔到光差就會失靈.另外係你枝閃燈必須係用中間的一點引發,如似我枝咁四角四隻腳就會用唔到.

[schindler]

用 cable 搭埋一齊就可以支副燈放?人後面會識閃

[dcmad]

schindler:

唔該,我想問清楚,如果用線連接操作,咁我要買?乜野? 係咪Tumax閃光感應熱靴再加線就得,但我兩支燈係唔同型號,咁點接,同埋係咪要買2個感應熱靴?

[schindler]

有 cable 轉 hot shoe 及 hot shop with cable 座
約 100 元
好似插蘇及蘇座配搭

吾需要閃光感應,靠 cable 訊號閃
可靠性較高

[dcmad]

schindler:

唔該晒!

[jacprodv]

NIKON TTL CABLE SC-17,SC-18,SC-19,SC-24 SEE YOUR SB800 MANUAL

[skchan]

to buy a flash attached sensor