[hh8046]

Zoom 的時候得得聲 , 跟住出"LANS"字 , 然後自動熄機.
請問有冇人出現同樣問題呢 ?

[gaiuswong]

我部機Zoom 的時候間唔中都有得得聲,入廠記得順便叫Canon做埋防塵,佢地話可以幫你將支鏡身D接口位收緊加密,可以防止到冇咁易入塵咁話喎,所以我支鏡須有兩點小塵都自殺~趁佢仲係保用期內囉番上去,免日後麻煩,而家都仲未囉番,不過Canon服務都唔錯,整完可以免費送番部機比你,唔使自已上去囉,入廠咪當check 下部機囉~一笑.

[valentino]

if 做埋防塵, they need to 開 your camera right? after refix, will the camera be affected??

[gaiuswong]

果個姐姐仔話有機會成支鏡換過添,唉....我都驚都諗過,不過長遠都係要做架喇,等到入塵多到亞媽都唔認得又過埋保用果時都唔知點算.

[chu_ka_man]

我部pro 1 成枝L-Lens 換咗 .
但都不防塵 ??!!
因為可能鏡筒QC有問題 .
因為pro 1 不是密封的 .

[gaiuswong]

咁Chu ka man兄,你整完之後D質素有冇變 will the camera be affected?? 支鏡變 焦有冇學佢話緊左呀,如果冇可能同你淨換鏡?

[348]

I find out the Pro 1 improved a lot after repair. ( dust removed ).

[valentino]

my pro 1 was also 入廠 for dust removing, but they said they don't need to 開 the camera body, they can dismantle the front cover glass by zooming the lens to certain level ( details they don't open to pulbic ), then remove the dust in vacuum box, today they replied us that they have removed all the dust inside the lens, and tomorow they will rectify the shade corner ( when wide and large aperture ) by their software which do not need to 開 the camera as well.

[348]

The shade corner ( when wide and large aperture ) can not adjested by their software .It still have shade corner but the sharpness is improved esp. in 200mm.

[valentino]

so 348 兄, did u really ask them to 將支鏡身D接口位收緊加密 in order to 防止到冇咁易入塵 ??

they said they will use the software to shift the CCD's cutoff area to see whether the shade corner can be eliminated

[348]

Yes, they said , they will 將支鏡身D接口位收緊加密 in order to 防止到冇咁易入塵 . But shade corner still have.

[gaiuswong]

我部Pro1 Canon今朝都搵速遞送番比我喇,支鏡當然係好乾淨啦,初步試image output操作完全正常.

[hh8046]

我發現有一死點, canon 回應話保五點, 請問合理否?