[wing1011]

我想知點解set左iso 50...但係佢display出黎係iso 100既?@@"
點set架?@@"
2...ND濾鏡係咩...有咩用?@@"

[wing1011]

同埋呢...set快門既時候點樣轉去右邊set光圈

[swlo]

1) Set ISO
先按 Function 鍵，再按上下至 ISO SPEED，最後按左右至心目中之ISO 值。如想走出 Function 之晝畵面，需再按 Function 鍵一次。

2) ND 濾鏡
用來減光用。如光圈去到最細時一樣曝光過度，則可用此功能。亦可在不想曝光過度之情況下，在黑暗環境中捕捉光亮之移動物體。

3) set 快門既時候去右邊 set 光圈
只能在 M 鍵中同時 set 快門和光圈。只需將圈按下便可選定快門或光圈。

希望幫到你

[wing1011]

唔該曬swlo^^"
第1個依然係有問題囉...我就係放左去iso 50度呢...但係quaity同機上既display都係係100既...?@@"

[swlo]

wing1011,

I don't know why you can't change the iso by using the "FUNCTION" mode. Maybe I describe it in more details by using english (I can only manage to type Chinese very very slowly)

First of all, you must make sure your G5 is in one of the following modes:-
1) P (Programme)
2) TV (Shutter pirority)
3) AV (Aperture priority)
4) M (Manual)

The second step is to press the "Func" button. A screen of different function settings will appear. You then have to select the ISO speed by pressing the upper / lower part of the "*/- & WB" button. When you are at the iso speed function, press the left / right part of the same button (or using the dial) to change the iso speed from 50 - 400 or auto.

Having changed the iso speed, you can press "display" button to view the status of function in use.

Hope the above solve your problem ~.~

[wing1011]

我知道點解了...係我傻仔..把可以影100張當左做iso~cccc
今日去行山影左...幾靚呢@@"正正~@@"