[law_derek]

我將相片拿去一些kodak express的店舖輸出, 但發覺色彩很差, 和電腦螢幕見到的完全兩回事, 請問有沒有方法解決?或者哪間店舖的輸出質素較佳?

[solidman]

我都試過lee個問題,
因為電腦個mon d settings經常有偏差既關係(例如光暗, 色溫等),
所以同曬出黎既效果會有唔同

我記得有雜誌(好似係電腦廣場)介紹過有隻產品(連software),
使用方法係將隻打放係個mon表面,
n then佢就會detect個mon既settings(大概係咁啦)
可以幫你調校番個mon既輸出至最接近曬相既質素,
個名就唔記得左, 好似都唔係好貴

[takeshi90]

其實晒相的時候,打相人員係會幫你再調較color/brightness/softness
所以,如果你唔想比佢地調較 color,你要同佢地講"直出"
直出即係咩都唔調較,直接出相
而係相後面,你會見到有一行code...如果你見到有 N N N N ..即係直出

[Benmark]

但我記得這種軟件是set自己個mon同自己個printer。使到個mon?color配合個printer，for 自己打印。好似叫Color vision...。同出去曬相好似無關。你可先試幾幅相，e.g. 如果曬出來太光，就試調暗D。再曬。如果試好，就不要轉第二間，可能唔同。

[cardcard2001]

咁請問直出好定經佢地調校過再出好 D ? (例如以 Fotomax 為例)

[wklouis]

我而家通常都唔會去KODAK晒相, 因為出來九成都會偏色. 最好那間都係可以接受吧了.
我去過好幾間FUJI晒, 色彩自然好多, 直出都無問題. 不過按不同的相舖就會幫你再調校. 若你用DC影既話, 建議你先裁好比例才拿去出相.
個人認為晒相最緊要唔好貪平, 只要你搵到一間晒得好既, 就唔好轉.

[peter_]

以前初初影相唔識(無internet 可以問) 以為自己影得唔好原來好多時係晒得差, 之後搵過好多間都唔穩定, 所以學wklouis 所講搵到一間晒得好既, 就唔好轉..

[kkyy]

This is the product you referred to:
http://www.pantone.com/products/products.asp?idSubArea=0&idArea=2&idProduct=321&idArticleType_Products=0

[kkyy]

I have Color plus at home, very easy to use.

You probable can't have control over outside lab. What I do is I ask them not to adjust the photos for me, the back will show: NNN.... as someone already mentioned. Then you adjust your retouching to match it. There is some calibrator to adjust your mon according to your print, very expensive and probably only for pros.

At home I print regularly and after sometime I can adjust my retouching so that prints from outside lab or at home both suit me, but only from experience.

[vicochan]

Depend use Nikon or Canon Camera.Because fuji have many open Channel for Canon and Nikon Camera.If you Canon camera is original setting from factory and take the JPEG FILE (Canon only) .Color is natural and beautiful.If use Nikon Camera, you must take the picture from RAW FILE and use Nikon Capture 4.2 and Photoshop to adjustment! You feel the result is better than Canon.But you need the time to adjustment.

[takeshi90]

睇下打相果個對色的敏感情度而定..
基本上同一張相你係同一間晒2times.color/bightness係會唔同

我覺得你可以晒一張直出的相
之後反屋企對住個monitor調整color /brightness直到你覺得mon跟直出果張相的color一樣為止

[聖戰熊]

我諗你係指呢套軟件 :

http://www.colorvision.com/profis/profis_view.jsp?id=281

[wklouis]

我用NIKON D70, 係MON睇, 同我而家晒開那一間差不多一樣. 我一向盡量唔去後制相的, 只會調光暗.