[louislouis]

大部份時間都係用部300D影人像。初初用parameter 1，覺得顏色好正。
後來人老左（講笑），鍾意清淡，轉用parameter 2。

本來用正常暴光，後來覺得部300D偏暗，結果永遠+1/3 EC。

請問這樣做正確嗎？

[man1492]

據聞喱部機個metering係偏暗的

[louislouis]

我想做個少少的統計，究竟多人用300D的parameter 1定parameter 2呀??

[Everlast]

Many 300D users prefer to set exposure compensation to +1/3, that's just normal.

I use neither parameter 1 nor 2, instead, i use a custom that only contrast is set to +1, while others remain 0.
I found the pics may sometimes be over-saturated if saturation is set to +1.
It is also always better to increase sharpness by software means.

Somehow, I think it also depends on which lens you are using. If prime L is used, parameter 2 is already sufficient to produce brilliant colour.

[dixonkwok]

I also have the same settings (param 1 and always +0.3EV) but use RAW instead.

Still, Param 1 and +0.3EV are still needed if you choose JPEG instead of RAW.

[louislouis]

我都試過用P1 and +0.3EV，不過我覺得D顏色有點誇張，唔得自然。我而家用緊P2 and +0.3EV，但係有時覺得D顏色又太淡。好難決擇。

[louislouis]

「我都試過用P1 and +0.3EV，不過我覺得D顏色有點誇張，唔得自然。我而家用緊P2 and +0.3EV，但係有時覺得D顏色又太淡。好難決擇。」


請問各位師兄有何高見呀？

[hosang]

我satuation同sharpness都+1
ev + 2/3
大至上都幾好
但係都係成日under

[bearkee]

Normal case --- I used custom, sat & sharp +1 ,ev +2/3
ext flash ex550 ev -1/3

Important case -- used raw +photoshop

at home ---- i used Adobe RGB + photoshop (for my baby)

different lens use different sat /contrast, so 300D users need write down the note !!