[calvinng168]

各位大哥 / 高人,

本人是新手上星期六(5月27日) 買了NIKON D70S Kit set, 在頭7天內未無發現任何問題, 但昨天我第一次拿出街去拍婚紗展(灣仔會展), 其間我發現2個問題:

1) 在取景位, 見到有克點, 我只用泵吹過鏡頭及取景位都無法除去那克點. 請問如何解決???
2) 回家後, 發現那Kit 鏡內有很多水點, 我見相片下有一行水跡 (不過我不肯定), 於是我立即放入電子防潮箱內 (塑膠箱); 我害怕會發霉在鏡內, 我怎樣處理??? 是不是要去nikon修理. 若放入防潮箱內幾天鏡會否自行消失 ???
另外, 日後外出後要怎樣保護鏡頭及在冷氣出入的地方後應該怎樣造 ???

[Rol]

1) If not appear at photo nor effect picture quality, let it be, dust at viewfinder is inevitable.

2) http://www.dcfever.com/forum/read.php?f=1&i=396175&t=396175

[d2c]

會員戶口已被刪除，資料已被標示為不顯示

[R40]

自已處理就將 机及鏡放在微溫的地方如HiFi TV上加熱

待入面水氣散咗就抹乾淨放防潮箱

[d2c]

會員戶口已被刪除，資料已被標示為不顯示

[calvinng168]

謝! Rol 哥回覆!! 多謝你的意見
1) 明白
2) 保鮮袋, 待機身溫度回復正常街外溫度後才入放防潮箱內. 另外, 電燈泡能蒸發鏡頭內之水點是一個好的提議.-- 但水點在鏡頭內之克膠邊內(伸長鏡計), 這樣如何解決??.

[Rol]

Are you sure it is water inside the lens ?

What thing you did at your lens..? If just temperature difference from air condition to outdoor, water mainly condense at protector filter, should not so seriously to have water bead inside the lens. This is one advantage of using protector filter.

Try to use light bulb to make it dry, if 水 積 remain at glass, go to CS to fix it.

[calvinng168]

Rol 哥昨天我去了CS, 答案如何

1) 若取消取景位上克點是要付$350(太貴), 於是我不理會這點.

2) 鏡頭內之水點--那姐姐拿了鏡入房問師傅, 回來後, 她說: 這些水點是鏡內之反光物料, 且每支鏡內一定有少少這些反光物料, 另外, 她拿多一支鏡給我看(她說師傅用來試機), 我見這鏡真的有一些水點(反光物料), 於是我無奈接受及離去. 但我記得買機時, 我見不到這情況??

3) 我聽說: 在冷氣地方,將鏡放入保鮮袋, 鏡上濕氣無法走出來(但我已用保鮮袋入機身及鏡頭) 我十分困擾, 那一個方法才是正確保護鏡頭在出入冷氣 ??

謝!

[Rol]

2) My 18-70 kit lens also has a small silver material, it may exist at tube and one day may drop to the glass surface. If it is not visible above F11, let it be…

3) The way (plastic bag / light bulb heating) was learnt from E-zone.. The topic was about interviewing Canon technican how to prevent lens getting mold.

You should be sure the lens is dry before put in plastic bag, if still have doubt, put a small bag of silicon gel with lens in the plastic bag. Also the lens in plastic bag just for short time, no need to be so cautious.

[怪俠]

鐘鏡頭不論平貴，在香港出入冷氣雖然都有水氣霞霧問題，
但好快就散，真係未試過出水咁嚴重，怕衹怕影響日後發霉?！
唔通你去過影冰雕？