[redbean]

我有部2年幾前買o既GP叉電器(model GPKB01BS)
d 電係1.2V 1300mAh(都係2年幾前買)
我叉滿4粒電
但起動唔到部Canon A40
到底係我d 電太舊
定係1300mAh/ 1.2V 唔夠 (因為我見有d 係>1300mAh & d 鹼性電係1.5V)

如果要買新叉電器
有乜好介紹呀?
唔該晒~~~

[chanraymond3]

我用閞都係1.2v GP, 都無問題, 建議:
1. 買鹼性電池試試起動到唔到A40, 若唔得即是A40問題, 得即是電池問題
2. 將你手上的GP電池試下其他電器用唔用到, e.g. 電視遙控器
若唔著, 電池有問題, 若得, 即電壓唔夠

[yinyeah]

there are different choices available in the market. just go to citicall or ap liu street & you will know.

i'm using a package set of panasonic 2000 mah + world wide charger. it is working good so far.

[redbean]

我部A40 no probem 呀
請問你d GP 電係1300mAh 定係再大d?

我頭先起動到(玩野 =p)
不過display 唔夠電
唔知係d電太舊定係1300mAh 太少呢

[redbean]

我部A40 no probem 呀
請問你d GP 電係1300mAh 定係再大d?

我頭先起動到(玩野 =p)
不過display 唔夠電
唔知係d電太舊定係1300mAh 太少呢

[Hercules]

The rechargable battery have lifetime of 500 to 1000 charge cycle, your battery may reach the end of the life. And buy another higher capacity is not a bad idea as you can use longer time than your 1300mAH

[chanraymond3]

我用係GP 1600及1800, 不過如hercules兄, 不論1300/1600/1800/2000都係無分別, 可能你d電?得多或使用不當, 快死了....或者試下第二部?機看看是否?機問題

[dede]

chanraymond3兄同Hercules兄所講的都是對的，個幾粒電咁耐，壞的機會好高，因NiMH任何類的叉電都會自動內部放電，太耐了，如果是NiMH over discharge，就叉唔翻啦。

叉機壞的機會很少，袛要接觸點良好，叉機有會?燈，咁多數還可正常叉電。