9 月 4 日 (星期四) | 會員登記|會員中心
吹水閒聊
近日收到不少網友意見,指 DCFever.com「吹水閒聊」充斥愈來愈多粗言穢語、人身攻擊、誹謗等不理性討論。作為 一個以攝影興趣為主題的網站,此等漫罵式討論已超出 DCFever.com 設立討論區之原意。DCFever.com 呼籲大家以 攝影交流為目的作理性討論,並正密切留意事態的發展。
Post new topic   Reply to topic  到最上層  |  回到主題  |  搜尋 
頁數: 1共 0 回應
上個主題 :: 下個主題  
作者 訊息

Joe_HF




註冊: 2003-01-17

上載我的肖像
題目IXUS 400開FLASH會自動提高ISO???     Post time: 5 月 31 日

有冇人可以證實一下?

http://www.imaging-resource.com/PRODS/S400/S40PICS.HTM

Flash Range Test

Good flash range, only a little falloff at the 14 foot limit of the test, but a little "cheating" to get there...

In my testing, the S400's flash illuminated the test target all the way out to 14 feet, without any significant decrease in intensity. It turns out though, that the S400 "cheats" a little to get that range: When the flash is active, the camera apparently boosts its ISO setting automatically, the increased light sensitivity helping greatly with the flash range. I don't have any way of telling what the ISO is actually boosted to, since my utilities here that read the EXIF header information can't interpret the S400's ISO information. Judging from the image noise though, I'd say that it's boosting it to somewhere between ISO 200 and 400. It would be nice if this auto-boost could be disabled for those times when low image noise is more important than flash range, but I suspect that most consumers will be happy enough with the results as they are. Below is the flash range series, with distances from eight to 14 feet from the target.
Back to top
 
頁數: 1共 0 回應
Post new topic   Reply to topic  到最上層  |  回到主題  |  搜尋 



 討論區列表  |  Need a Login? Register Here 
 User Login
 User Name:
 Password: