[sannaso]

可以下載了

[sannaso]

[Ryeung02]

Sannaso兄：5D3, 新玩具？

[sannaso]

hah,成年有多了,當時正價買,咁就玩左八九千蚊了

[Ryeung02]

5D3對我來說唯一缺點係重量，咪早早跳過6D直上了。

[chengyison]

做左白老鼠，更新後的用晶片提示的手動鏡
用唔到,猛出error,桉快門即Hang機。我用的晶片是
第八代。呢招都算絕,迫師兄們用原厰鏡。

[chengyison]

不過佳能都算有良心，更新後唔like可以轉番舊firmware

[lsammy]

我在瑩記買的晶片提示手動鏡接環
用5D2,5D3,就算new firmware 1.2.1
都完全用到

[h0001244]

Is it only enable focusing on lens with F8 (F4 x2 or F5.6 x1.4)?
I don't feel any change with ordinary lens say 50L or 35F2, just want to confirm !

[YOUTAK]

我都UP咗了...好似話有對應EYE-FI咭ERROR問題,得閒試吓先....:P

[tsuikaman]

i test already 400L f5.6 with 1.4 II have center point AF = F8

[didir]

456 + 1.4x III -> 568

[wah_66288]

可以比5D3 new firmware 1.2.1我嗎!THX

[digcam888]

The traditional chinese version not yet available. Is that right ?
I couldn't find this.

[t502kg]

==>Is it only enable focusing on lens with F8 (F4 x2 or F5.6 x1.4)?
I don't feel any change with ordinary lens say 50L or 35F2, just want to confirm !

h0001244 ching, also fix the slow focusing speed when using flash AF assist beam details as below

Firmware Version 1.2.1 incorporates the following functional improvements and fixes.
1. Uncompressed HDMI output is now enabled.
2. Enables the center AF point to autofocus when the camera is used with Canon EF lens/extender combinations whose combined maximum aperture is f/8.
3. Improves the speed of the camera's acquisition of focus when using a Canon Speedlite's AF-assist beam.
4. Fixes a phenomenon in which the LCD monitor may freeze and display Err 70 or Err 80 when a still photo is taken during Live View or in movie shooting mode.
5. Fixes a phenomenon that may occur when the continuous shooting priority setting is enabled for multiple exposures, such that, after the sixth image is taken, there is a slight pause before the remainder of the sequence is completed.
6. Fixes a phenomenon in which the viewfinder display shows incorrect information during AEB shooting.
7. Communication with the WFT-E7 Wireless File Transmitter has been improved.
8. When images have been successfully transferred with the WFT-E7 Wireless File Transmitter through the FTP protocol, an "O" will be displayed. When images have not been successfully transferred with the WFT-E7 Wireless File Transmitter through the FTP protocol, an "X" will be displayed.
9. Fixes a phenomenon in which the camera may not function properly when an Eye-Fi card is used.
10. Fixes a phenomenon in which the focal length value listed in the Exif information is not displayed correctly for images shot with the EF 24-70mm F4L IS USM lens.
11. Fixes a phenomenon in which the lens firmware cannot be updated properly.
12. Corrects errors in the Arabic language menu.
13. Fixes a phenomenon in which the camera changes the AF microadjustment value to -8.
14. Fixes a phenomenon in which the on-screen guidance cannot be fully displayed when setting the maximum limit value for the "Setting the ISO Speed Range for Auto ISO" option.