[ah_dum]

想問下想兩閃都做無線飛燈 (ETTL and non-ETTL)
應該點set?
試過用鴨記飛燈接收裝在580EX 行master, 270行slave
但270只可以full power輸出冇得set低d
另外又試左直接用5D3控制270但又detect唔倒部270
Thx!

[Lee_Nok]

Film ware not yet upgrade~wait la~

[ah_dum]

Thx
But 5D3 and 270EX II同時出都竟然溝通唔倒？！

[hpipaq]

580ex 裝上5D3 上做master, 270ex 做slave. Enable wireless flash function in the camera menu. 270ex 要按鍵變slave

[ah_dum]

Thx
但如果連隻580EX都想一齊做WIRELESS又應該點set?

[hpipaq]

no way. you need to buy canon ST-E2 $2500 or new flash Canon 600EX-RT Speedlite Flash $6xxx.

or other band wireless supporting TTL, like Yonguno ST-E2 $900, like Pixel king $12xx.

or other band no TTL support, $200.

This is the reason why I hate Canon no internal flash. By the Way, Nikon D800 have internal flash and it can do a wireless Flash. (Camera off flash)

I use my 60D internal flash to control 430EXII.

[ah_dum]

Thx Ching
Very detail

[h0001244]

Pixel............I am using it. With Off-camera E-TTL capability, $9xx. Okay la. Much Cheaper than pocket wizard with 80% function.

I trigger my 430EX 1st generation all the time to obtain creative photography

[Lee_Nok]

Can use "PIXEL King" or "Phottix Odin" to use E-TTL~
Or "Phottix Strato II"~5 in 1 function~but no E-TTL on 飛燈

[ah_dum]

What's the difference between PIXEL KING and st-e2 ?
Can st-e2 control the output power of flash ? Or can only control the ratio ?

[h0001244]

I use Pixel Knight TR-332

[hpipaq]

@ h0001244

PIXEL KNGIHT $9XX, WHERE ?????

[ah_dum]

Should I buy pixel king if I want to use two wireless flash? 580EX AND 270EX II

[rankinelo]

I use Pixel Knight TR-332 x2

1 transmitter + 3 receivers (580 and 430) <- no problem, works on 550D, 5DII and 7D

but the QC for this stuff is really not good, need to test carefully before buy

[Lee_Nok]

ah_dum ching~
Here's the problem~if u won't put a flash on the hot shoe of your camera~You should choose Pixel King~Cause it can transmit E-TTL to slave flash~but it won't support flash if u put the flash on the Transmitter~
That means u can only use your flash on two receivers~
But if sometimes u'll put the flash on the hot shoe of your camera~u'll have to use phottix Strato II~cause the transmitter can support E-TTL even on the hot shoe of the camera~but the receiver won't support E-TTL~you'll have to use M mode on your flash~