[kypoon0207]

我買咗 ixus 400 約 14 日左右就發現到有 2 點死點，激氣有得換，我想問會唔會係我自己整到有死點，定係佢的質量有問題呢，請各方英雄赐教........多.....謝哂呀！

[kypoon0207]

sorry 我寫錯咗，係冇得換至係真， sorry sorry

[kypoon0207]

唔通真係黑得咁透徹，一個人都唔答吓我架？

[almenma]

LCD 死點定 CCD死點?

[kypoon0207]

唔好意思我唔係好明，但我知哂相出來見唔到有點，但用部機影黑色野咁就見到有 2 點白色細細點出現响我眼前啦~~~~~。

[Jiangbianliao]

Do you see the spots on the camera LCD only or do you only see it when you enlarge ir on the computer screen? If it is the former, it probably is the LCD having dead pixels. If the latter, it's likely that the CCD has dead pixels.

[Jiangbianliao]

Do you see the spots on the camera LCD only or do you only see it when you enlarge it on the computer screen? If it is the former, it probably is the LCD having dead pixels. If the latter, it's likely that the CCD has dead pixels.

Dead pixels on the LCD would not affect picture quality. One or two small dead pixels on the CCD also would not seriously affect the image.

[kypoon0207]

好多謝你們有人回應我，多謝哂 ><，證明我都未黑得哂，看完以上的資料我想應是 LCD 的死點，因為在相片中看不見的，但 LCD 死點的原因是我不小心弄壞，或是相機 LCD 本身質素有關呢，因為若果人為可以另到 LCD 會有死點的話，我從今以後就要加強保護佢呀，請各位指點。多謝赐敎！

[walkingfuture]

據我所知﹐係好少機會人為架禾﹗
LCD有死點其實響工業界(或者叫做響生產方面)係好正常的﹐個個廠家都有其內部spec. 而呢個spec 往往亦會根據買家(即係DC manufacturer)的要求。加上買家/廠家都唔會真係100%check 晒甘多塊玻璃(LCD)﹐所以好多時候就會有甘既情況出現。當然﹐如果買家的IQC(即係check 貨果個部門)係認真D的話﹐我相信係可以做到100%的﹗

[kypoon0207]

果然係有料呀，明哂，多謝赐敎。

[charleshcl]

其實有dead spot 係好正常, 你諗吓, 個screen有十幾萬pixel, 十幾萬分之二有問題, 其實個良率都好高嫁啦. 如果你要求100%冇問題, D DC 一定唔會係宜家嘅價錢.

[kypoon0207]

好多謝 charleshcl 咁安慰我，原來香港重有好多好人架！家陣我已經決定去 canon 度維修啦，冇計.......唉！

[onionhead]

不過講真...整完過一排又可能會出返黎...
不過點做整左先

[kypoon0207]

唔係馬，我估我好好保護佢，d 死點唔會生番出來掛，如果第日又有咁我咪好忙 (成日要去維修)，唔好嚇我好噃。

[kevin755]

你買的是水貨呱？系了，你用呢部機覺得點樣，畫質如何,電池耐用嗎？會不會像大家講的，拍幾張相就發熱得厲害？我都打算買啊，