[ew515]

上次玩完Omlypus隻Won08,心思思想買埋支Tcon17...點知去到間shop試(@$580),唔知係咪個膠接環"滑牙",擰極都上唔穩,唯有放棄.
番到屋企唔甘心,借咗朋友個膠接環再試,又得喎...
下面有相睇: (用腳架於同一位置影)
p.s. FZ1 係12x zoom...X 1.7 = 20x

請於登入後輸入訪客密碼： test06

http://home1.photostation.epson.com.hk/servlet/GuestLogin?USERNAME=fz1

1)相片質素冇明顯下降
2)有啲頭重尾輕,成日好似就甩就甩

跟住梗係拿拿林同信興訂番個新接環($65)...PK.吖..又擰唔穩...睇嚟都係同20x zoom無緣...重諗住用嚟影concert添...

[tam_dominic]

The original plastic adaptor cannot screw in.

I am using FZ1 + TCON17 and it sits on FZ1 firmly.

The way to do it is to use a metallic sand paper to rub the front of plastic adaptor until the TCON17 can screw in about 2 to 3 turn.

The follow link was taken by FZ1 + TCON17 handheld in burst mode and select the best one :
http://www.dcfever.com/photosharing/enlargephoto.php?photoID=116503

Happy shooting !

[ew515]

Thanks dominic,

但我想問清楚:係咪用黑色?隻沙紙(好似有1000/2000號)...??圈咁輕磨內圈螺絲紋?
另我本身有用UV鏡當護鏡,會唔會磨完之後上唔番!?

p.s.但好奇怪,個Wocn08又上得好實?,大家都係55mm....

[tam_dominic]

NO !
Do Not rub inside.

Don't know about product code of sand paper.
I just bought it from an ordinary hardware store.

I have both WCON08 and TCON17 working with FZ1.

Happy shooting !

[ew515]

咁即係磨個接環前面個圈(磨短)!?

[靚蝦后]

ew515兄,

Wcon08 質素 ok ma? 四週成像有冇鬆呀？
Thanks!

[tam_dominic]

咁即係磨個接環前面個圈(磨短)!?

Yes.

Image quality of WCON08 at tele-end is 'POOR'.
When aperture is wide open at tele-end only the centre part is good.

Happy shooting !

[ew515]

To Dominic,

Thank you! I will try and let you know my result....
....................................................................................................................................
To 靚蝦后,

For quality of Wcon08, pls refer:

請於登入後輸入訪客密碼：test05

http://home1.photostation.epson.com.hk/servlet/GuestLogin?USERNAME=fz1

[Braveheart]

To ew515,

Use a higher grade sand paper (larger number, say Grade 400 or higher) for a smoother finish. You only to sand off 1 mm of thread for a secure fit. You will not regret it.

Good Luck

[ew515]

thank you for advice from dominic and braveheart, I can fix the Tcon17 on my FZ1 adaptor firmly now...haha : - )