[smallhand]

大家無睇錯，我的確係講緊賣行貨間三洋香港分公司

話說我在一家鋪頭換AZ3，幾部都有問題，我打去Sanyo度，佢地叫我拎埋部機去話會負責

我將部機拎去佢地度，畀佢地睇過有問題的相，成功用過不同ISO同快門repeat個問題（個rep死唔信，結果我好有耐性咁同佢試足兩粒鐘），本來佢地就拎最後一部畀我，點知我一睇唔止見到LCD死點，一影竟然都有相片畫面出現好多條直條粗黑點，情況就同之前畫面被劃花一樣

跟住佢話佢senior manager出trip，聽日覆我，我都算勒，就等

第二日，佢打電話黎話有solution，就係將NR啟動，然後效果會改善好多

但係我好快就彈番佢轉頭：你睇睇本menu，NR要1/4秒至activate架喎，你又睇番D相的EXIF係幾秒？跟住佢又死死氣話再研究，聽日再答

第三日朝早，收到兩幅佢寄黎的所謂試機相，其中一幅竟然係接近全黑的：話就係1/8秒的sample畀我參考，仲有另一幅係set一秒用NR

我真係畀佢耍到火都大，立即send email過去炒佢：

I don't want to waste any more time, it's annoying. Sanyo is the largest digicam OEM in the world, you should know the problem. Let me point out what's wrong:

pic 1: shutter speed 1 sec, but what I told you yesterday is NR ONLY activate after 1/2 or 1/4 secs (ask your engineers check the manual!). Should I turn the shutter to 1 sec all the time, even I would like to take a racing car pic, or even a little kid move on? Did you understand what I told you yesterday?

I will not do that with other Sanyo OEM cams like Nikon and Olympus.

pic 2: pic in the black. Try to take a pic with a camera cap, even if it
is using 30 secs or bulb w/o NR, nothing will be happened. Hey there are 10 ppl in the pic, can't you see it?

我仲提到話如果佢真係做唔到決定，我願意同佢的眾多經理傾，我之前肯慢慢試機都係因為尊重大家，而且我心願只係要部work的機而已。如果你咁唔尊重我，一路有要說服我，想塞部有問題的機畀番我，我亦都唔會再忍耐。

佢打番電話過黎兩次，兩次都好唔識相咁繼續講NR，但唔同ISO試過，唔同光暗試過，有無NR發生的快門速度又試過，十張有七八張係咁，仲拗

然後斷線，佢成個下晝無打電話黎。由於七日包換，而佢咁樣用拖字訣（我就係咁畀完錢買完後無得用仲要勞氣）我火滾到去左消委會問詳情，如無意外，聽日我會帶齊所有記錄去落case，亦可能再考慮額外途徑

行貨做得咁啦渣，同黑店無分別，掛羊頭賣狗肉。Sanyo的機係唔錯，但係香港公司太不長進，而且DC係好需要保養的item，大家可以參考我的遭遇，諗下買唔買；如果真係要去買，水貨同行貨要冒的險，可能分別不大

[gapman]

Sorry to hear that and everyone should be aware when choosing DC ! But even Canon is one of the most popular DC brand in HK, I heard that the technical people and repairng centre are really bad too ! That's what I heard:
If the LCD have less than 10 dead pixels, Canon wont' help you to repair it ! Woooooooo ! Think about it, you are only using 1.5 or 1.8 inches LCD and 10 dead pixels ?????????????????

[Philippe]

香港地好多維修部都係廢物,係一個完全冇監管的部門.我之前買部Contax Tvs Digital因為係新仔唔識過相,打去問居然話部機好新佢地都唔識.叫我去問賣機的永成,簡直厚顏無恥.

[lk4uleung]

Oh what a black sheep....................

[烂苹果]

Can you tell me the address....

[smallhand]

三洋香港在觀塘（近牛頭角地鐵站）海濱道航天大廈三樓