[ericcho2003]

我今日買了一個SUNPAK auto355AF的閃光燈

但不知為何影親張張都全白色~~~~~~~~~~

好像過度暴光咁~!

是否用了柔光罩會好點?

可否指教下我應該怎樣做好

thank you very much

[CYY]

可能你攪錯了！這不是TTL閃燈，而是一普通的自動/手動閃燈！

看你的情況，可能你沒有自行調較合適的光圈，所以張張都爆晒光！

假如你用手動的話，閃燈將會閃到盡，你可以用M模式自行調較光圈快門。

假如你用自動的話，你可以跟著閃燈背後計算表的指示，調較合適的光圈，那麼，閃燈就會用電眼去測光，然後自動閃出合適的光度。

[tam_dominic]

Set Aperture priority mode.
Set aperture as indicated by table on the flash unit.

Happy shooting !

[ngcleric]

慢慢較快個快門試下
FZ10唔support TTL
用外閃係有點煩 ^_^

[tam_dominic]

Since the flash light last less than 1/1000 second, setting the shutter speed only affect the existing light.

If the flash is the main light source, ISO and aperture are only considering factors for exposure.

Happy shooting !

[tam_dominic]

The following is quoted from Panasonic Forum of www.dpreview.com :

" In Menu, set External flash to Manual (not Preset). Set the camera to Aperture mode and set your ISO (either ISO 50 or ISO 100). Set the Sunpak to match the ISO setting on your camera. Choose one of the automatic settings on the Sunpak and note the corresponding f/stop. Set the FZ10's aperture to match that f/stop.

That should do it. (Might want to set your white balance to flash.) "

Happy shooting !