[ngu3288]

http://web.canon.jp/Imaging/eos20d/eos20d_firmware-e.html

[twynson]

今次掂唔掂呢

[yamamoto]

點解canon既機出左唔駛一個月成日update software既?唔通有問題?

[os_beginner]

1.0.4一放出黎，跟住立即收番…收番無耐咁快又出到1.0.5. 真係唔知話佢有效率定應該懷疑佢個QA -_-

[twynson]

係有好多人投訴唔掂呀.

[rcyh]

I tried to update to 1.0.5 from 1.0.4, removed the lens while updating. After the update, I turned off the camera and removed the battery. After I turned back on the camera, I couldn't turn back off. And no response when pressing the "Menu" button. After removing the camera again, everything is normal. Anyone has the same experience??

[iwkwong]

I just update my firmware to 1.0.5 and is very the progress is very smooth by following the instruction wor!
Then i change the lens while the camera is on and then take a few shot and no problems found!
How com to see some many problem????

[老叟]

最冤枉無辜就係先一批用家囉,生機變死機!!
升級前鏡頭要除下,之後關機取出電池二秒鐘先好開機!!

[arnott]

其實可唔可以將在機身的1.02版傳輸到電腦做back up 架?

請指教！

[arnott]

請覆覆啊~

[twynson]

唔得架.....裝咗就等於programe.
同電腦programe 一樣...無setup.exe...

有錯請補充..

[arnott]

thank you.

[Ivanmark]

各位師兄：
小弟部20D仲係 1.0.2，諗住睇定D先 Upgrade。點知今晚到姐夫家中去試一試他的鏡頭(他全是用Canon鏡)(我得支Kit-lens)，試完第一支，熄機換鏡啦，又得，再試過第二支，又熄機換鏡，點知熄咗機，個機頂顯示屏仲有字顯示，但按其他制無反應，即係Hang機，將兩粒電拆出嚟再裝番先正常(我有用直度)。試過有幾次都係咁.......換鏡都hang機！(平時一切正常)
現在請教各位師兄，你哋試過咁嘅情况未？ upgrade 1.0.5會唔會正常番呢？
唉，真頭痛！

[肥叉飯]

換鏡都hang機有幾頭痛丫, 最多咪唔換鏡!

有d失焦咪仲死, 唔通唔影咩!

[肥叉飯]

換鏡都hang機有幾頭痛丫, 最多咪唔換鏡!

有d失焦咪仲死, 唔通唔影咩!