[gangtie]

我買咗SONY BCG-34HRMD， 2300MHA X 4, SANYO 2300MHA X 4
以前果部叉電機發覺只可以將2000MHA 的電叉足一半電力。

[wtfgary]

qantie, I work for a rechargeable battery comapny so I kind of know the trick of this product.

Take a look at the back of your old charger, it shall say something about "output" of the charger, may you tell me what is the output ??

[gangtie]

[img]http://www.steeltalking.com/forums/images/photo_0004.jpg[/img]

[gangtie]

waiting for yr reply!

[gangtie]

all brand new batteries, 2300mha, sanyo, sony, panasonic

[gangtie]

[img]http://www.steeltalking.com/forums/images/photo_0004.jpg[/img]

[ngu3288]

It seems that your old charger is quite old for NiMH batteries. The charger is probably designed to cut the power after a certain time has lapsed (timer cut off designed).

For newer NiMH charger, power cut off is controlled by built-in microchips to detect delta-V (change of voltage) of the batteries. So it is safer to use newer NiMH charger.

[jasonipm]

i want to ask about this also,
thank ngu3288 answer clearly

[tommythumb]

想請教下，其實不同種類電池既應用範圍，包括 NiMH, alkaline 同普通碳性電池。

NiMH 電池可唔可以用o係普通電器，如電視遙搖？

有d電器有寫明不建議用NiMH, alkaline 電池！但好多無寫，我地點樣知道，有無一般既指引？

唔該。

[ngu3288]

Use NiMH batteries in remote controller is not recommended due to its self discharge property (about 10% loss after 1 day even not use, thereafter, about 1% loss per day).

For low power consumption devices (such as TV remote controller, clocks), use of alkaline batteries is recommended. An alkaline battery can last for over 1 year with very little self-discharge.

NiMH batteries are ideal for high drain applications such as digital cameras and flash units.

[莎莉]

我又想問下.
我有部panasonic的叉機,for 2100mph的叉電.
咁我可唔可以叉其他牌子2100 or 2500的叉電呀?會唔會整壞d電架?
thanks!

[bean290]

Anybody know which brand of re-chargable battery can support 20D, I have tried GP2300, Camelion 2500 and Sanyo 2500, all show battery half full in 20D. I'm using GP 1 hr quick charger and sanyo 5 hr charger.

[ngu3288]

To 莎莉,

If your Panasonic charger is a NiMH charger, and the batteries are NiMH type (no matter what brands and capacity). It's OK.


To bean290,

There have been a lot of forum discussions about using NiMH batteries in 20D's grip. But seems no definite solution to the short battery life problem.

The grip manual states that you have to ensure the batteries are fully charged and use same brand. If the problem still exists, try another brand of batteries.

[EricWYC]

有個小問題想問問

我有一部 GP 叉機同四粒 GP 1600,(一套買的),NiMH
之後朋友送左四粒 panasonic 2100 比我,NiMH

我想問下,
如果用GP 叉機 叉 panasonic 2100 ,
會唔會叉唔滿?只係差到1600 就停?

如果買 2000-2500 叉機,
那款抵用?

Thanks...

[ngu3288]

If the GP charge is a newer design charger (not a timer cut-off charger), then it can fully charge a battery of whatever capacity.

那款抵用我就冇咩研究, 我就用 Panasonic BQ-395. 鴨記賣 HK$210 左右(包 4x2400mAh AA電). I found the following link for your reference:

http://www.tlc-direct.co.uk/Products/PBBQ395.html