[wa_hk]

本人用300D, 但經常影出來的相會對不準焦(明明對得很準)或矇(明明快門不低(遠大於1/f建議標準)且沒手震(註:我菲林機經常在35mm時會用1/8都不會震), 同樣情況拍幾張才可保證拍到一張問題不大的相. 聽說是因為300D的反光板震盪引起, 不知350D在呢方面有否改善? 謝謝各位!

[walkingfuture]

基本上300D响快门慢过1/60而又手持摄影时都会有因反光板震动而影响质素。但要视乎个人要求，实则上影响唔系话大到好离谱果只。所以以你之描述，我觉得似outfocus 多D禾！

350D听闻已改善不少，比20D好D/

[ken l]

恭喜你有隻機械手 1/8 都唔震..犀利.......

[pj1101hk]

會員戶口已被刪除，資料已被標示為不顯示

[schindler]

有冇試過用反光板預鎖呀

[goosie99]

1/8 秒唔手震真係了得，不過以前得並不是永遠都得，我個同事就係咁，成日話部EOS 10D對焦有問題，終於用腳架就證明到啦。

[kkyy]

In film days, most of the time people go to lab to process and print 3R and 4R, nowadays using dslr you use your 15" up monitor to view it, sometimes to 100%. That makes you think you can handhold your film cam at 1/8s . Mirror flap has always been a problem but only now you know how important it is after magnification. Even 1-series bodies shake (you can see it with your naked eyes) when mirror goes up. That's why some people who ask for sharper photos use longer than 2 secs timer delay when using MLU or shooting a burst of few shots claiming the 2nd or 3rd shot is sharper when the camera rebounds, or mount the body instead of the lens on tripod to damp the vibration.

To conclude, if you ALWAYS NEED to view your image at 100%, use a MLU, cable, heavy duty tripod, sandbag.....everything that is available. It is not D or non-D SLR that is at fault.

[ivanslh]

我用350D+kit lens都有相同問題, 影十張有九張相用100%睇果時都係矇, 差D要搵部D70黎換...點知D70+kit lens都係咁. 以前用開F717 & N5700 1/8秒都無手振, 銳利非常. 我覺得反光版彈得太勁係主要因素. 其實支Kit lens真係差到暈, 轉過支50mm F/1.8 即刻好好多, 不過要起碼要 1/50秒先清

[fat_chai_wong]

會員戶口已被刪除，資料已被標示為不顯示

[rainwong]

我用300D果時, 都有留意, 用KIT LENSE影完放大睇都係唔夠清架喇, 但晒出留睇就OK啦, 安全快門都係1/30, 如果低慢過呢個數都係調高ISO, 唔好夾硬黎

[beancurdbean]

Kit 要收光圈用
$600支super wide zoom, 如果可以開盡用就會太勁