[paul_43]

想問下.. 有無邊隻閃燈岩Nikon D80用.. 個燈頭又可以轉既呢?? 我想用直倒打橫影個燈都可以射上天花板... 有無架?? Thanks!!!

[pakcb]

我都係 d80 用家
我都考慮緊
出面多數都係買 原廠...副廠就多數買sigma
原廠就多數會係 sb400 sb600 sb800 三枝中考慮
三枝價錢...大概 8xx 17xx 27xx 講真買枝野幾百幾千蚊閃閃下...好貴
多數人買得 d80 呢個級數都唔會買 sb400
其實 sb600 都真係夠用...但係見好多買左既都會賣出黎換sb800
網上最多人都只會說 買 sb800
sb600 同 sb800 既功能 自己你上 nikon 網到比較就會見
我個人就會覺兩枝分別最大係
sb600 vs sb800
mic vs mij
功能夠 vs 功能強勁爆 (其實最主要係多左飛燈)
sb800 光度火力會強過 sb600
兩部機相差九百
至於sigma 都唔平...我會覺俾多少少用番原廠好過

[papayaphoto]

it is because SB800 is very easy out of order.That's why many sell it again.

[Ah Chai]

papayaphoto

could you tell us more about "SB800 is very easy out of order"?

how is the situation?

what kinds of error it usually got?

[pakcb]

$2780 周街都係貨
所以你買到 $2680 都好正常

[老叟]

SB800 is a good work horse, if you use it properly!!!

[paul_43]

... SB800個燈頭又可以轉?? 得唔得?? 官網無寫...

[Rol]

Of course SB800 flash head can turn all direction.

Except larger output, I like A mode at SB800 because

- A mode can work with D70/50/40 syn flash 1/4000 sec with power loss.
- A mode can let SB800 work on other brand DSLR.
- A mode has faster response than TTL flash

Just like SB80DX even DTTL is no longer used, but its A mode can still work on DSLR.

Instead if one day Nikon launch new flash system and not use i-TTL, SB600 is no use at all except M mode.

[Steven Wong]

Can anyone tell me whether SB 600 can work on other camera such as Fuji 9600 or other prosumer camera with hot shoe? I mean i-TTL system.

[icekinhk]

9600一定唔支援(i)ttl, a or m mode

[icekinhk]

如果只玩一支flash , 我會支持一支到位, 兩頭唔到岸就煩

[展翅高飛]

小弟用Sigma EF-500DG Super，這東西每幅照片都會under 2/3 到 1 級，打去Sigma問，他們説是正常的，因爲怕我over，lost detail，您們說是不是騙人了……

[Rol]

Steven Wong

Cannot because first, SB600 or even Sigma 500 DG super is without A mode. Second, if not Nikon body, can not use I-TTL, except S5pro.

Reluctanly you can use M mode of SB600 at your 9600

[Rol]

Before I used Sigma 500 DG super for Pentax.

My path was : back shop to change new one -> wrote complain letter -> went to CS -> used M mode only -> finally sold out.

If you want to keep using this flash, use FV lock + flash EV will have more stable output.

[Steven Wong]

Rol

Thanks