[hsc]

CF咭制式問題:
部相機的CF咭槽,有支針斷左,但又好像無乜問題
邊度可以CHECK到CF咭的制式,看看那一支針是否有用OR 無用呢?

[怪俠]

直接去信生產廠商問會較省時間。

[maximilianyuen]

CF Card Pin-out

Here is how to connect the CF card the Mega163's ports:

This table is for True-IDE mode.

Pin Num Connection Pin Num Connection
1 GND 26 OPEN
2 PA3 27 OPEN
3 PA4 28 OPEN
4 PA5 29 OPEN
5 PA6 30 OPEN
6 PA7 31 OPEN
7 PC5 32 PC6
8 GND 33 OPEN
9 GND 34 PD6
10 GND 35 PD7
11 GND 36 VCC
12 GND 37 OPEN
13 VCC 38 VCC
14 GND 39 GND
15 GND 40 OPEN
16 GND 41 MEGA 163 RESET
17 GND 42 OPEN
18 PC4 43 OPEN
19 PC3 44 VCC (10k pull-up)
20 PC2 45 OPEN
21 PA0 46 OPEN
22 PA1 47 OPEN
23 PA2 48 OPEN
24 OPEN 49 OPEN
25 OPEN 50 GND
Notes:

-IOCS16 is needed for 16-bit addressing
CF card busy state is checked by polling the Status Register so INTRQ or IORDY pins are not used
-CSEL is connected to ground, so device is in master mode.
I used 5V VCC, but 3.3V is also allowed. See specs for details.

[maximilianyuen]

http://pinouts.ru/Memory/CompactFlash_pinout.shtml

[hsc]

謝高人
不過cf咭左右是對稱的
只是凹槽一邊闊,一邊窄,如何分1腳呢?

[kingkonghk]

你前後左右對1次, 如果都係對到open, 你就可以放心

[pongyee]

Max 提供的網頁左上角有一圖。

我認為係卡面(印有商標)向上的圖解，即上面一行為 pin 26 - 50 。




Max.
Thx anyway.

[maximilianyuen]

>>>有 個 fool-proof notch 位

I have been thinking how to say that thing :)
not even know how to say it in chinese....

>>>我認為係卡面(印有商標)向上的圖解，即上面一行為 pin 26 - 50 。

I think so ~

[老叟]

到目前為止淨係CF介面係ATA工業標準,其他果D全部未被確認!!

[hsc]

支針仔一係pin25一係pin26
反正都是open
仲有,我試過拍完一張咭,都無事

多謝以上師兄提點

d2c兄
cf咭的fool-proof notch 是一邊闊槽,一邊窄槽,但佢無寫到邊隻是1腳的
[起馬我幾張咭無啦]