[kingyiu]

想請教大家少少野
就係我買 minolta f200隨機附送既sanyo叉機
咁差兩粒sanyo2000 mah係問題~盞燈就一路著住直到叉滿
但係我轉位置叉佢又係閃下閃下
咁我今日買左4粒都係sanyo既叉電
叉4粒2100 mah既電反而盞顯示燈閃下閃下
大家知唔知點解呢?
我依家叉兩粒又無問題呀....
請解答~~同埋知唔知要叉幾耐呀???

[sleung40]

It might be because the charger does not support 2100 mah. Even if it works, it might not be 100% full. I think you can check the maxium mah value the charger can support on the manual, or on a label on the charger.

[kingyiu]

但係呢~
我問過dc career個sales
因為我既sanyo2100 mah o係係佢度買既~
佢話support呀!
我依家差兩粒電又真係無事~
盞燈係長著呀!
但當我一插入4粒2100 mah佢就黎料啦~
盞燈閃下閃下~
真係唔知點解~~可能你講得o岩啦

我仲有野問呀!
我有一個gp既充電器1600 mah(5小時快差)
唔知support唔support我既sanyo 2100mah既電呢???
或者gp本身既2000mah既電呢???

[sleung40]

If the difference is so big 1600 and 2100, it probably won't have enough power to charge it fully.
And, one more thing to notice, chargers that only charge Ni-cad batteries cannot charge Ni-mh or others. Use only the correct charger for the battery unless the charger can support two or more types.
Using wrong charger for batteries can be extremly dangerous because it can generate heat and cause fire.
So be careful!
It happened to me before, I charges ni-mh in a ni-cad charger and the charger melted. It was lucky that I saw it in time, or else, it could have light up!!!

[kingyiu]

唔該你解答呀!
嘩~~
你真係好好彩jei~~
下次小心d~
我都要呀當然

唉~~咁我依家都唔知點啦~
買4粒SANYO 2100MAH電~都要$98嫁~(我知有D地方平D,不過時間同埋車錢都係度啦有時計落)
有4個place~但係最多用2個黎差~
仲要係唔知差唔差得滿添呀~
你指DC大食嫁啦~我仲要係F200~幾大食下~
都唔知得物有冇其所用呀!
如果我買過SANYO既差機知唔知要幾錢呢???

不過講開差電~即使唔係淨指AA電啦~
都要例牌差耐D呀!
聽人講話係D電池有MEMORY WOR~
D電量會去番頭一次差既界線位~
同埋差耐D會"禁"用D~~耐用D WOR
係咪真係因為咁解釋呀???

[ricer]

請問是否一個原設計叉1600mah的差機一樣可fully叉2100mah的電，而只不過要比叉1600mah時用上更長時間？

請指教。

[ricer]

Reference:

http://www.copquest.com/battery_care.htm