近日收到不少網友意見，指 DCFever.com「吹水閒聊」充斥愈來愈多粗言穢語、人身攻擊、誹謗等不理性討論。作為 一個以攝影興趣為主題的網站，此等漫罵式討論已超出 DCFever.com 設立討論區之原意。DCFever.com 呼籲大家以 攝影交流為目的作理性討論，並正密切留意事態的發展。
| 上個主題 :: 下個主題 |
| 作者 |
訊息 |
faith_91
註冊: 2003-05-02
上載我的肖像
|
 充電問題? Post time: 6 月 25 日 |
|
|
請問如何才是真正的充滿電.
我用sanyo 的機, 背後寫是920mAx2, 是否每小時 920mA, 但我去充panasonic 2000mA時, 1.5小時已關了燈,
我馬上再充, 燈又亮了.
有一次充4粒, 又是1.5小時, 但我看背面寫是460mAh , 應是5小時起碼吧.
請問如何才好, 是否不正常呢?
|
|
|
|
 |
faith_91
註冊: 2003-05-02
上載我的肖像
|
| Re: 充電問題? Post time: 6 月 26 日 |
|
|
|
請各高人指教.
|
|
|
|
|
wtfgary
註冊: 2003-03-07
上載我的肖像
|
| Re: 充電問題? Post time: 6 月 26 日 |
|
|
|
Some charger has a ready signal, you know, "Charging" is Red, "Ready" is Green. However, it is more like a timer instead of a signal. Say, the charger comes with 1800mAh batteries, then the charger's timer is only good for 1800mAh batteries. Once the time is up, the signal will turn from red to green and it only output a minimal level of electricity to keep the batteries in excellent condition. If you are charging 2100mAh batteries with the above charger, please cut the power and charge again after you see the "Ready" signal. You should be able to see the "Charging" signal once again.
|
|
|
|
|
| |
