[dt401hk]

五區開始了，大家繼續交流
可Click回之前四區參考：

602交流一區
602交流二區
602交流三區
602交流四區
Koala Bear 兄 : Understanding Sharpening 正呀！
Glutathione 兄：支WCON-07B 加咗成舊水！！未有wide 鏡，好想買！！
二手WCON-08 要成五舊幾。吾扺呀！
上次問 M mode，如何長有測光bar？？？？？？？？No answer.

[hkahshun]

Today, I went to Man Shing and Wing Shing to quote the wide 鏡. (DCC was close)

Olympus wcon-08b $1550
Olympus wcon-08 $8xx
Olympus wcon-07 $7xx

When I ask the sales what is the different between wcon-08b and wcon-08, he just say that it is desinged for two model and go to service another customer. What is the different wcon-08b or wcon-08?

Is it difficult to get 55-55 adapter?

[dietcoke]

想問下而家仲有冇602賣，要有得供既?

MANY THX

[ngric]

Olympus wcon-07 $7xx ??????
比wcon 08 平.....唔係貴d咩?

另外,支持602第五版出現,事關最近好靜...各位係時候用602去影相啦

[ngric]

先達同298都有602賣...可以睇睇..有得供

[dietcoke]

"先達同298都有602賣...可以睇睇..有得供"

係唔係DCC丫?定係第二D鋪頭，有冇名?同埋大約幾錢?

千萬個唔該^.^

[Koala Bear]

hkahshun，
Olympus WCON-08B is made for Olympus E10 & E20. It is 62mm thread and a huge lens. For WCON-08 which is 55mm thread, it is made for Olympus C-series DC. It is true that WCON-08B is much more expensive than WCON-08.
I think you have quote wrong price for those lens. WCON-08B may be HKD15XX, WCON-08 is about HKD690 while WCON-07 is around HKD10XX.

dt401hk，
The article "Understanding Sharpening" is really good. I learn much from reading it. For the problem of the exposure bar in manual mode. I don't have much experience about it, but I found that whenever your focus is in the dark area, the bar will disappear. May be the exposure of the focus area is out of the capability of S602Z, e.g. exposure time over 15sec. That's all my guess! I really don't know the underlying reason and how to make it always appear. Sorry for that!

[hkahshun]

To Koala Bear
Thanks for your comment.

To dt401hk
I guess when 602 would not perform AF for the target object, the exposure bar could not show.

[dietcoke]

有冇人試過係先達D細鋪頭到買過機?有冇問題?
我想買既係行貨602
如果有死點或光點，咁去番原廠會唔會換或修理?
仲有602行同水張保養証有冇唔同架?

MANY THX

[dietcoke]

~push

[hkahshun]

dietcoke
My 602 was brought from 先達DDC (Hong) with warranty 富士影像產品保用服務證書. I think water goods without this warranty. As I know that DCC agree to change the whole product within 7 day for any damaged parts. After 7 days, you should go to 富士 for repair.

[dietcoke]

即係如果七日後發現死點或光點，富士會換或者修理丫係唔係丫?

hkahshun，可唔可以幫我一個忙，影張保養証比我睇下丫，感激不盡

[hkahshun]

dietcoke,
May be my english is not good, i mean that if 發現死點或光點 within 7 days, DCC would change a new one for you, not 富士. But after 7 days, you can only take the 602 to 富士修理部 for repair.
I have posted my warranty, please take a look on 作品發表區.

[ngric]

我好想問下..我係用Raynox 55-52 adoptor....而我想買 Raynox DCR-6600PRO...咁在最wide時24mm (咩都唔zoom),究竟會唔會出現黑角呢??因好似好多版本........如果無黑角,大約zoom幾多先會出現呢? 同埋其實隻鏡係唔係幾好...可以同O記W con-07比較

[dietcoke]

hkahshun

右上角果個係咪 serial no.?係咪對機身編號丫?

thx a lot