上個主題 :: 下個主題 |
作者 |
訊息 |
joeykwh
註冊: 2003-12-04
上載我的肖像
|
快門問題,THANKS. Post time: 12 月 26 日 |
|
|
唔好意思,新手一名又有問題啦,請各c hing幫忙.
我用M,TV,較快門,一開閃光燈,快門只可以去到1/200,如果唔用閃光燈的話,可以去到1/4000.我想問咁樣係咪正常呀?
我係用CANON 450D.
THANKS
|
|
|
|
 |
JSmith
註冊: 2006-07-18
上載我的肖像
|
Re: 快門問題,THANKS. Post time: 12 月 26 日 |
|
|
呢樣叫快門同步閃燈,用閃燈時,快門最高速度只可以去到1/200s,呢樣係相機本身限制。
|
|
|
|
 |
JSmith
註冊: 2006-07-18
上載我的肖像
|
Re: 快門問題,THANKS. Post time: 12 月 26 日 |
|
|
原來你都有好多問題喎
不如買本基礎攝影既書睇下啦
|
|
|
|
 |
tcfreeman
註冊: 2008-12-07
上載我的肖像
|
Re: 快門問題,THANKS. Post time: 12 月 26 日 |
|
|
smith, very good suggestion
joe, u reg.ed more than 5 yrs, it is not a beginner, no excuse.
seen, the important note of manual, often shown on 1 pg
read carefully before u use the products
|
|
|
|
 |
joeykwh
註冊: 2003-12-04
上載我的肖像
|
Re: 快門問題,THANKS. Post time: 12 月 27 日 |
|
|
JSmith:我已經買咗四本攝影教學書,其中有一本係教點樣用canon 450D,不過我唔係好睇得明,嘻嘻,我資質低.
多謝你嘅回應.THANKS
|
|
|
|
 |
joeykwh
註冊: 2003-12-04
上載我的肖像
|
Re: 快門問題,THANKS. Post time: 12 月 27 日 |
|
|
我想報CANON嘅攝影課程,不過好FULL,報唔到呀>.<
|
|
|
|
 |
JSmith
註冊: 2006-07-18
上載我的肖像
|
Re: 快門問題,THANKS. Post time: 12 月 27 日 |
|
|
450D既書,只係講下操作為主,要有一定基礎知識,你有本manual唔洗錢既
你要睇基礎攝影既書
|
|
|
|
 |
joeykwh
註冊: 2003-12-04
上載我的肖像
|
Re: 快門問題,THANKS. Post time: 12 月 27 日 |
|
|
JSmith:收到c hing,唔該晒你呀^^
|
|
|
|
 |
tcfreeman
註冊: 2008-12-07
上載我的肖像
|
Re: 快門問題,THANKS. Post time: 12 月 27 日 |
|
|
yes, a basic photography bk, try go to SWINDON, TST
|
|
|
|
 |
pongyee
註冊: 2006-03-04
上載我的肖像
|
Re: 快門問題,THANKS. Post time: 12 月 28 日 |
|
|
基本攝影書,唔使去晨衝,高登都有。
|
|
|
|
 |
jazyee
註冊: 2008-05-22
上載我的肖像
|
Re: 快門問題,THANKS. Post time: 12 月 28 日 |
|
|
a simple explanation is, a flash also needs time to reach the top, faster than 1/200 will cut the light, b4 it was only 1/60-1/125, ok?
wants to know more?
|
|
|
|
 |
micros
註冊: 2003-04-07
上載我的肖像
|
Re: 快門問題,THANKS. Post time: 12 月 28 日 |
|
|
jazyee:
totally wrong!
the brust need only about 1/1000 in case of full power, it is a nonsense to say that the machine lock shutter for this.
for better communication, I would use Chinese.
sb-800 full power 需要 1/1050s﹐1/200s 曝光足夠有餘。
部份影樓燈慢o的﹐1/200 左右。
1/60 可能係好舊o既燈。
不過點都好﹐根本唔關事。
呢個係焦平快門先天問題﹐唔關閃燈輸出時間事。
dc 同傳統鏡間快門o既機唔會有呢個問題(當然都要考慮輸出時間)。
唔理開唔開閃﹐係 x-sync 速度以上﹐快門無一刻係全開﹐曝光係靠隙縫掃過。
咁o既情況用閃就有問題﹐因為閃燈太快﹐唔會成程都發光﹐o的相會一o的有光一o的無。
所以相機會硬性限制﹐唔俾你係快過 x-sync 下用閃燈。
呢個問題可以用 high speed flash / focal plane flash 解決﹐原理就係用頻閃﹐令快門隙縫每個掃過o既地方都有閃光。
睇o左先講
http://www.ted.photographer.org.uk/photoscience_control.htm
http://www.wrotniak.net/photo/tech/fp-shutter.html
第一張動畫係 high speed flash o既情況﹐第二張係平常﹐即係樓主講o既情況。
|
|
|
|
 |
jazyee
註冊: 2008-05-22
上載我的肖像
|
Re: 快門問題,THANKS. Post time: 12 月 28 日 |
|
|
Thanks micros you are perfectly right,
yes, the problem is the shutter gate, sorry, i didn't mention, i was wrong , i should say when the whole camera ready needs time, actually i did use some camera can set 1/500.
|
|
|
|
 |
jazyee
註冊: 2008-05-22
上載我的肖像
|
Re: 快門問題,THANKS. Post time: 12 月 28 日 |
|
|
actually 1/60 is for "cloth gate" shutter
1/125 is for "metal gate" like pantex K2, nikon F series.....
so if using a camera without gate, can go even faster, like 4x5.....
am i right ? pls correct, thanks so much.....
|
|
|
|
 |
|