[XexeX]

如果要影立法局出面，或街燈下影相，應該用黃色定燈色的柔光罩？

[lokism3]

White!

[pongyee]

在乎你需要的效果。

[XexeX]

我試過用白色，但影出黎太唔自然，而家買左個橙色，有機會再去試試。

[mike0210]

個燈罩既色溫好難同立法會既燈相同
都幾難搞
一係唔好用燈, 一係將主體擺係閃光燈完全cover到既範圍再set wb
閃燈照唔晒成個立法會
如果係雙光源wb, 用xrite 隻colorchecker 應該有幫助

[lokism3]

The colour temp. & colour rendering of the LEGCO's general lighting (SON lamp) are both too low; so although we tune the right colour temperature, but we can't get the right colour (because of the low rendering) still. Even, if you put an "orange" colour light on the model, and tune your WB to lower setting; you'll find that the colour of the building still no good at all (only a bit better).

My choice would be using the colour temperature difference to make a big colour contrast between model & the building!

BTW, I don't think any conventional orange or yellow coloured stuffs can get an accurate colour temp. correction. Try to look at some colour correction filters for your flash light.