[laiykk]

請問那部 scanner 用於上述用途會較好呢?
是否用底片 scan 出來的相會偏黃?
請各位指教!!

[lingling]

scan底片係用燈箱,唔係only scanner

[hktsoi]

這要看你的用途, 如果只是用作螢幕觀看用途, 一般連燈箱的平台式Flatbed Scanner已經足夠.

如果是用作一般輸出相片, 平台式Flatbed Scanner只足夠scan相片, 底片要用菲林Film scanner.

如果要用作輸出菲林或印刷, 最好使用Drum Scanner, 因為色的層次會更豐富和景象會細緻。

[laiykk]

Thanks hktsoi!!

我的用途是作為儲存、製作photo vcd及返晒3R之用(較尋找負片方便)

如作為上述用途請問2400x1200dpi 是否足夠抑或要用到4800x2400dpi?

請問對MICROTEK的評價又怎樣?

[stlam]

Microtek 5900 is ok, cheaper than HP or Canon, if you need to scan different size film in addition to 35mm. But you have to care about the horizontal and vertical axis for film scanning.

[Edward Mak]

2400x1200dpi 夠有突

[andrew]

我提議比多d 錢買 Minolta 35mm film scanner + IEEE1394 card. 用 flatbed scan 35mm (特別係 negative) 只可以 "just for fun".

我唔知你買左未. 如果買左, 試下用一張 negative film 哂張 4R, 然後用 flatbed scan 左個底, 再拿去哂一張 4R, 相信你唔想要你個 scanner lu.

[占]

Andrew兄, Minolta 35mm film scanner + IEEE1394 card 大約幾多$$?
知唔知 CanoScan FS4000US 得唔得, 佢都好似成 $57xx.

[stlam]

If have negative on hand, no need to scan and then print la. Just print it using negative is much cheaper, best quality and less work done. For me, film scanning is just for email to friends or post to web.

[vgar]

如果用 flatbed 的燈箱 scan 菲林 , 雖然都可以做到個 dpi 好大 , 但張相會好鬆而且層次唔分明.

如果那些菲林係作商業用途 , 始終都係 film scanner 好好多.

[cafe1hk]

I am using a Epson Expression 1600 Pro seem ok for my 135 and 120 format slide and negatives..

[Aliu]

I am using Microtek 4900. I tried to scan film and the result is far from satisfaction.

[firerock]

請問Andrew, Minolta 35mm film scanner + IEEE1394 card 幾多錢?

Cafe1hk, Epson Expression 1600 Pro 好似好貴喎!! 請問幾錢??

各位, 有冇一D$2,000-$3,000樓下的選擇?? 唔該!!

[cafe1hk]

opps did not check for your reply
when I have my Express 1600 Pro it was approx 7500HKD, I did not have to buy a SCSI card as I am using SCSI Harddisk already.