全新Ophidian P1 Evolution loudspeakers 書架喇叭 (hand made in UK) 原價$12500 (貨尾特價$7800) 葵芳港膠所有售

Ophidian P1 Evolution

Ophidian P1 Evolution is a high-performance audiophile loudspeaker at a realistic price. The P1 Evolution is a 2-way standmount loudspeaker featuring a 180mm aluminium mid-bass driver and 27mm Sonolex coated fabric tweeter.

The 180mm mid-bass drivers were built specially for the Evolution project by SEAS of Norway and feature a large magnet for outstanding transient response and a stiff but lightweight aluminium diaphragm.

The copper clad aluminium voice coils, long throw suspension and low loss rubber surrounds allow the drivers to displace large volumes of air with very low distortion.

The 25mm thick floating baffle is mounted to the chassis via a flexible gasket which prevents much of the vibrational force generated by the drive units from transferring directly to the cabinet walls.

By acoustically isolating the drive units from the cabinet, colouration is significantly reduced and an incredible depth of detail and separation is revealed.

The combination of a cabinet structure built from plywood rather than the more common MDF and a clever floating front baffle arrangement set the P-series apart from other loudspeakers in their price range.

Plywood is stronger and has better internal damping than MDF. Along with our unique AEROFLEX technology this allows the P1 to produce a smoothly controlled and extended bass performance.

The P1 Evolution uses an optimised AEROFLEX bass loaded design built directly into the cabinet structure in order to brace and strengthen the cabinet walls. By drastically lowering port velocities the driver is properly supported throughout its stroke providing effortlessly detailed and dynamic bass.

The 27mm tweeter features an incredibly lightweight Sonolex coated diaphragm capable of producing an exceptionally lifelike sound that is also smooth and easy to listen to for extended periods. A tuned rear chamber and high power handling allows a low crossover point in order to blend seamlessly with output from the mid-bass unit.

Features

• 180mm aluminium midbass with large magnet, low loss rubber surround and copper clad voice coil

• Plywood cabinet construction with AEROFLEX port system

• 25mm thick isolated floating front baffle

• Optimised crossover using Mundorf components

• 27mm fabric tweeter with a lightweight Sonolex coated diaphragm

Specifications

• Frequency response – 45hz to 30khz

• Sensitivity – 86dB (2.83v)

• Recommended power – 50 to 100 watts

• Impedance – 8 ohms

• Dimensions – 349mm H x 192mm W x 310mm D* (plus 20mm binding posts)

• Weight – 9kg

本店地址： 香港葵芳葵豐街17-23號華業大廈B座3樓H室 (葵芳MTR C出口落行人隧道, 大約8分鐘到)

營業時間為星期一至五上午11:00am至5:30pm星期六日及公眾假期休息

- 接受信用咭, Paypal, 微信支付, 支付寶, 轉數快付款