物品分類
iKan - Beholder Gimbal MS1 專業相機穩定器 Gimbal 3-axis handheld camera stabi...
iKan - Beholder Gimbal MS1 專業相機穩定器 Gimbal 3-axis handheld camera stabi...
iKan - Beholder Gimbal MS1 專業相機穩定器 Gimbal 3-axis handheld camera stabi...
iKan - Beholder Gimbal MS1 專業相機穩定器 Gimbal 3-axis handheld camera stabi...
iKan - Beholder Gimbal MS1 專業相機穩定器 Gimbal 3-axis handheld camera stabi...
1 / 5

出售iKan - Beholder Gimbal MS1 專業相機穩定器 Gimbal 3-axis handheld camera stabilizer

二手 HK$1,500
賣家
ericauky (2) 
查詢次數
0
瀏覽次數
70
刊登日期
14 日前
最後更新
14 日前
刊登期至
2025-07-02 14:59:05
刊登狀態
進行中
對話 立即出價 私訊聯絡
物品介紹
.95% new,100% work,長期作備用
.包含原包裝或標籤
.參考價錢: 約 USD399.99


額外加送:
3 x 18650 Batteries
1 x 18650 charger
1 x Battery Cap



[簡介]
• The Beholder Gimbal MS1 is a 3-axis handheld camera stabilizer designed for point-and-shoot and mirrorless cameras to achieve smooth, stable footage. The Beholder uses brushless gimbal motors to stabilize movement on tiltand-roll axes and provide incredibly smooth image capture while shooting handheld, while walking, or in any situation in which the camera is moving.

• The MS1 can support up to 1.9 pounds (860 grams) of camera. A number of cameras are well-suited for the MS1 including the Sony a7S, RX-100 and NEX series, Panasonic GH4, Samsung NX500, and Blackmagic Pocket Cinema Camera.

• The gimbal’s ¼” – 20 thread mount at the bottom of the handle is perfect for attaching an articulating arm that serves a screen for monitoring / recording (e.g., a small monitor or smartphone), or for mounting the MS1 to a monopod, tripod or slider. The built-in 5-way joystick control offers complete command over pan/tilt and mode choice. Select from “Follow,” “Lock,” and adjust Pan-and-Tilt.

• A USB port on the handle can be used to power a small LED light or your smartphone. Included with the stabilizer is a quick-release balance plate, an offset camera mount, an onboard USB LED Light, a USB cable for charging, and a travel case.



Special Features
• 3-Axis Stabilized Gimbal System (pan, tilt, and rotate)
• All-Aluminum Construction
• No tools required for balance
• Easy mount and balance with Quick-Release Balance plate
• Gesture Control System
• Pan and Tilt Control Stick
• Follow and Lock Modes
• Supports BMPCC, GH4, A7 series, Sony NEX series, etc.
• ¼” – 20 thread mount


[產品資訊]

Height 268 mm / 10.5 In.
Length 168 mm / 6.6 In.
Width 123 mm / 4.8 In.
Weight 778 g / 1.7 Lbs.

Weight w/o Battery 641 g / 1.4 Lbs.
Max Supported Weight 850 g / 1.9 Lbs.

Range of Motion 90º-180º
Yaw 355º
Pitch 355º ±180º
Roll 355º ±60º

Battery Life 2-3 Hours
Electronics Main Board 3-Axis Stabilizer Gyro System
Battery Type 3 x 3.7V Li-Ion 18650 / 2600mAh



[資料來源]
https://www.bhphotovideo.com/c/product/1180478-REG/ikan_beholder_ms1_mirrorless_camera.html?fromDisList=y

https://ikancorp.com/Downloads/MS1-OS.pdf

以及網上資料


港鐵站:大埔墟站 / 金鐘站
(只接受現金、面見交收)
小提醒:近日有賣家以低價出售各類產品, 但只接受匯款或電子轉帳, 當收款後卻失去聯絡。請倍加留意,以免損失。


檢舉
    公開查詢
    ericauky 的信用評價
    • 買家
      wy2633 (12) 約 6 個月前
      貨品新淨,價錢合理,很好的交易。
    • 買家
      MikW (12)  約 1 年 7 個月前
      Good seller ❗❗