Paint Thickness Gauge | Digital Meter for Automotive Coating Thickness Gauge Tester | High Contrast Backlight LCD | Resolution 2mils | Auto Power Off | Auto Digital Calibration Data Hold Mini Size

About this item:
- Automatic calibration, data hold. Mini size with LCD display.
- Two units Available: mm/mil.
- Mainly used to non-destructively measure the paint thickness of car.
- High Contrast Backlight LCD
- No need calibration

Technical Specification:

Measurement range: 0~1.8mm/0~ 71.0 mil
Resolution: 0.05mm /2mil
Measurement error: +/- 0.1mm
Minimum diameter of substrate: Diameter 50mm
Minimum thickness of substrate 0.5mm
Work Temperature range: 18-30 degree celsius
Work Humidity range: 10-80% RH
Batteries: CR2032 x 2pcs
Outline Dimension: 35.9 x83.3 x 22mm
Weight: 63.98g (without batteries)

What is a Coating Thickness Gauge?
A coating thickness gauge (also referred to as a paint meter) is used to measure dry film thickness. Dry film thickness is probably the most critical measurement in the coatings industry because of its impact on the coating process, quality and cost. Dry film thickness measurements can be used to evaluate a coating’s expected life, the product’s appearance and performance, and ensure compliance with a host of International Standards.