注冊了 10+ 年
出售snapmaker 3D 打印模組
HK$300
賣家
ggggod123 (43)
查詢次數
0
瀏覽次數
407
刊登日期
2019-03-23 12:21:03
最後更新
2019-03-23 12:21:03
刊登期至
2019-04-22 00:21:03
物品介紹
按下圖放大
BASIC SPECS Color Touchscreen 3.5"
Depth 335 mm (13.2”)
Height 289 mm (11.4”)
Width 272 mm (10.7”)
Frame Material Aluminum Alloys
File Transfer USB Disk, USB Cable
Power Requirement 100 - 240V AC
Supported OS macOS, Windows
3D PRINTING Heated Bed Up to 80°C
Build Volume 125 x125 x125 mm (4.9” x 4.9” x 4.9”)
Print Head Travel Speed Up to 100 mm/s
Nozzle Diameter 0.4 mm
Nozzle Temperature Up to 250°C
Layer Resolution 50 - 300 microns
Supported Materials Non-proprietary 1.75 mm PLA, ABS, etc.
Nonsupported Materials Alumide, graphite, etc
Supported File Types STL, OBJ
Software Snapmakerjs. You can also use 3rd party software: Cura, Simplify3D, Slic3r
Depth 335 mm (13.2”)
Height 289 mm (11.4”)
Width 272 mm (10.7”)
Frame Material Aluminum Alloys
File Transfer USB Disk, USB Cable
Power Requirement 100 - 240V AC
Supported OS macOS, Windows
3D PRINTING Heated Bed Up to 80°C
Build Volume 125 x125 x125 mm (4.9” x 4.9” x 4.9”)
Print Head Travel Speed Up to 100 mm/s
Nozzle Diameter 0.4 mm
Nozzle Temperature Up to 250°C
Layer Resolution 50 - 300 microns
Supported Materials Non-proprietary 1.75 mm PLA, ABS, etc.
Nonsupported Materials Alumide, graphite, etc
Supported File Types STL, OBJ
Software Snapmakerjs. You can also use 3rd party software: Cura, Simplify3D, Slic3r
檢舉
公開查詢
Success
