FotodioX Excell+1 Olympus Zuiko (OM) 35mm SLR Lens To Micro Four Thirds (MFT /M43) mount cameras 減焦增光轉接環

Key Features：
• Olympus Zuiko (OM) 35mm SLR Lensto MFT Camera
• Supports Nikon G Lenses
• Integrated Light Focusing Optic
• Increases Maximum Aperture by 1 f/Stop
• Increases Angle of View by 0.72x
• Maintains Infinity Focus
• Leaf Spring Securement
• Brass and Stainless Steel Construction

For Below Lenes 以下鏡頭適用：
• Olympus Zuiko (OM) 35mm SLR Lens
$1380

M43 Series，MFT (Micro-4/3) Mirrorless Cameras - Popular models include:
• Olympus PEN E-P1, E-P2, E-P3, E-P5
• Olympus PEN E-PL1/s, E-PL2, E-PL3, E-PL5, E-PL6, E-PL7, E-PL8
• Olympus PEN E-PM1, E-PM2, PEN-F
• Olympus Air A01
• Olympus OM-D E-M1/II/X, E-M5/II, E-M10/II/III
• Panasonic Lumix DMC-G1, G2, G3, G5, G6, G7, G9, G10
• Panasonic Lumix DMC-GF1, GF2, GF3, GF5, GF6, GF7, GF9, G80/85, G90/G95
• Panasonic Lumix DMC-GH1, GH2, GH3, GH4, GH5/S
• Panasonic Lumix DMC-GM1, GM5; DMC-GX1, GX7, GX800/850, GX8, GX80/85, GX9
• Panasonic AG-AF100/104 Mirrorless Digital Cameras
• Blackmagic Design Pocket Cinema Camera Original & 4K
• Z CAM E2 / E2C Professional 4K, E2-S6 Super 35 6K Cinema Cameras
• Kodak Pixpro S-1 and YI M1
• Sharp 8k

***如欲選購，請註明型號或Cap圖***
WhatsApp / Signal：5128-8255
Expected Availability: 1-2 Working Days
一般等待時間為一至兩個工作天。

FotodioX EXCL1-OM-MFT-PRO Overview
Enabling the use of your Olympus OM-mount lenses on a Micro Four Thirds camera body, this Excell+1 Lens Adapter from Fotodiox additionally helps to increase the effective maximum aperture of your lens, gain a wider field of view, and maintain infinity focus. By incorporating a light focusing optic into this adapter's design, a magnification factor of 0.72x is applied to render a 50mm focal length lens as a 36mm lens, which then provides a 72mm equivalent focal length in conjunction with the Micro Four Thirds crop factor. This optic also condenses light in order to gain an additional stop of light, which effectively renders your f/2.8 lens as an f/2 lens.

The adapter is constructed from brass and features stainless steel finishing, and a leaf spring design is used to secure the lens in place and to ensure no play between the lens, adapter, and camera body. The adapter is fully manual and does not transmit any electronic functions between the lens and camera, and requires stop-down metering for use.